Kitchen Cabinet Cost in Avondale, AZ (2026 Pricing Guide)
Updated July 1, 2026 • 12 min read
Part of our Remodeling Cost Guides — see all 9 guides in this category.
Reviewed by Steve Hunt, Owner & Lead Designer · AZ ROC #339999
Quick answer: In 2026, installed kitchen cabinets typically run about $100–$280 per linear foot for stock, $150–$650 for semi-custom, and $500–$1,200+ for full custom. A typical mid-size kitchen of roughly 25–30 linear feet most often lands between $8,000 and $22,000 depending on the tier, box construction (plywood vs. particleboard), door style, wood species, and finish you choose. Refacing existing boxes can cut costs 30–50% when the layout works. Because Infinity Kitchens and Baths (AZ ROC #339999) buys factory-direct and installs in-house, our cabinet pricing typically runs 15–25% below big-retail quotes.
Cabinets are almost always the single biggest line item in a kitchen remodel — often 30–40% of the total budget — so understanding how they're priced is the fastest way to take control of the whole project. The trouble is that "how much do cabinets cost" has a maddening answer: it depends. Two kitchens the same size can differ by $15,000 based on nothing but the tier, the box material, and a few door and finish choices most homeowners don't know to ask about.
This guide breaks down exactly what you're paying for. We'll cover how cabinets are actually priced (per linear foot installed), the real gap between stock, semi-custom, and custom, the box construction and materials that quietly drive the number up or down, how door style and finish factor in, when refacing instead of replacing makes sense, what a typical mid-size kitchen runs, how Avondale’s homes and hard water factor in, and practical ways to save without gutting quality. Use it to budget with confidence and to read any quote you're handed like a pro.
1. How Kitchen Cabinets Are Priced
Most remodelers estimate cabinets by the linear foot — the total run of cabinetry measured along your walls and island. It's a fast way to compare quotes early: instead of adding up dozens of individual boxes, you multiply your linear footage by a per-foot rate for the tier you're considering. In rough budgeting, one "linear foot" typically bundles the base cabinet, the wall cabinet above it, and sometimes a countertop allowance, though a detailed quote will separate those out.
Behind that per-foot number, cabinet makers still price each box individually by its size, configuration, and door style. A 36-inch sink base, a set of drawer stacks, a tall pantry, and a corner lazy-Susan each carry different prices. That's why two 12-foot runs can quote very differently: one might be simple doors and shelves, the other a wall of drawers, pull-outs, and specialty cabinets. When you compare bids, make sure they cover the same boxes and the same accessories — not just the same footage. For how cabinets fit into the whole project, see our kitchen remodel cost guide.
2. Stock vs. Semi-Custom vs. Custom Pricing
The single biggest factor in your cabinet budget is which of the three tiers you choose. Here's what each one means and what it typically costs installed on our projects.
| Tier | Installed range (per linear ft) | What you get |
|---|---|---|
| Stock | $100 – $280 | Fixed sizes, limited doors & finishes; fast lead times |
| Semi-custom | $150 – $650 | Standard sizes plus modifications, more styles, woods & organizers |
| Custom | $500 – $1,200+ | Built to exact specs; any size, style, wood, or finish |
Stock cabinets
Stock cabinets come pre-built in fixed sizes (usually in 3-inch increments) with a limited menu of door styles and finishes. They're the most affordable option and often available quickly, which makes them a solid choice for rentals, budget refreshes, or simple layouts. The trade-off is flexibility: if your walls don't line up neatly with standard sizes, you'll end up with filler panels and some wasted space.
Semi-custom cabinets
Semi-custom is the sweet spot for most kitchens. You start from standard sizes but can modify dimensions, choose from a much wider range of door styles, wood species, and finishes, and add interior organizers like roll-out trays, spice pull-outs, and drawer dividers. You get most of the tailored look of custom at a meaningfully lower price. Our custom and semi-custom cabinet options live mostly in this range.
Custom cabinets
Custom cabinets are built to your exact specifications with no size or design limits — ideal for unusual layouts, specific storage needs, furniture-grade details, or a truly one-of-a-kind kitchen. They offer the most flexibility and, predictably, the highest price. If you have angled walls, a dramatic island, or want built-ins that flow into adjacent rooms, custom earns its keep. If your layout is fairly standard, semi-custom usually delivers the same look for less.
3. Box Construction & Materials That Drive Cost
The part you never see — the cabinet box itself — has a big impact on both price and how long your kitchen lasts. Here's what actually moves the number.
Plywood vs. particleboard. Cabinet boxes are built from plywood, particleboard, or MDF. Plywood typically adds roughly 10–20% over particleboard, but it holds screws and hinges better, resists moisture, and carries the weight of stone countertops for decades. Particleboard and MDF are perfectly serviceable for budget or lower-traffic projects, but near a sink or dishwasher — where a leak can cause swelling — plywood is the smarter long-term investment.
Drawer boxes. Dovetailed solid-wood drawer boxes cost more than stapled or doweled boxes, but they're far more durable and rarely loosen over time. On a kitchen full of drawers, this is one of the clearest quality tells.
Hardware — soft-close. Soft-close hinges and full-extension, soft-close drawer glides add cost per door and drawer, but they're the upgrade homeowners notice every single day. Many mid-tier lines now include them; on budget lines they're an add-on worth pricing out.
Construction style. Framed cabinets (with a face frame) are traditional and slightly more forgiving to install; frameless (full-access, "European") cabinets give you a bit more interior space and a modern look. Pricing is comparable, but the style affects door overlay and the overall feel.
4. How Door Style, Wood, and Finish Affect Cost
Once the box is decided, the doors and finish are where the look — and a good chunk of the cost — comes from. Doors are the most visible part of a cabinet, and they're priced accordingly.
Door style. A simple flat-panel (slab) door is usually the least expensive to produce. A classic five-piece Shaker door is a mid-range favorite. Raised-panel, beaded, mullioned, or glass-front doors add cost through extra machining and materials. If you're weighing looks against budget, our guide to Shaker vs. flat-panel cabinets breaks down the trade-offs.
Wood species. Paint-grade maple or birch and MDF (for painted doors) are the most economical. Oak and hickory sit in the middle. Cherry, walnut, and quarter-sawn or specialty woods command a premium. The species you choose also dictates how stain reads — another reason to see real samples before committing.
Finish. Finish is a bigger cost lever than most people expect. A standard stain is the baseline. Painted finishes generally cost more than stains because of the extra prep and coats, and specialty finishes — glazing, distressing, two-tone islands, or custom colors — add more still. A two-tone kitchen (say, painted perimeter with a stained island) is a popular way to get a designer look, and it's worth pricing as its own line.
5. Refacing: A Lower-Cost Alternative
If your existing cabinet boxes are solid, level, and laid out the way you like, you may not need to replace them at all. Refacing keeps the boxes and swaps out the doors, drawer fronts, and visible surfaces (plus new hardware), which typically costs 30–50% less than a full replacement and takes far less time. It's an excellent fit for kitchens where the bones are good and you mainly want a fresh face.
Refacing isn't the right call when the boxes are damaged, when particleboard has swelled or failed, or when you want to change the layout — move a wall of cabinets, add an island, or reconfigure for better flow. In those cases, replacement is the better investment because you're paying to fix the very things refacing leaves in place. We walk through the full decision, side by side, in our cabinet refacing vs. replacing guide.
6. What a Typical Mid-Size Kitchen Runs
A typical mid-size kitchen has roughly 25–30 linear feet of cabinets. Applying the per-foot ranges above gives you a realistic planning window before you've picked a single door. The table below shows how the tier drives the total for a 27-linear-foot kitchen (a common mid-size run), installed.
| Sample kitchen (~27 linear ft) | Tier | Estimated installed total |
|---|---|---|
| Budget refresh, stock boxes | Stock | $3,000 – $8,000 |
| Plywood boxes, soft-close, painted or stained | Semi-custom | $6,000 – $18,000 |
| Built-to-spec, specialty finish & accents | Custom | $15,000 – $32,000+ |
| Most homeowners land at | Mixed | $8,000 – $22,000 |
Most homeowners who want quality plywood boxes, soft-close hardware, and a painted or stained finish land in the $8,000–$22,000 range once installation is included. Your actual number moves with the exact linear footage, how many specialty cabinets and pull-outs you add, and your door and finish choices. These are ranges for planning, not quotes or guarantees — a walk-through and measurement is the only way to get a real figure.
Cabinets in Avondale homes
Most Avondale homes were built in the 1990s and 2000s — the city’s median home dates to 2002, according to Census data — so many kitchens here are working with cabinets that are 20 to 35 years old. Before you price a full replacement, check the sink base. Avondale’s water is very hard (city well water averaged about 21 grains per gallon in the city’s 2022 water quality report), which is tough on faucet cartridges, supply valves, and dishwasher connections, and a slow leak under the sink is what usually ruins a particleboard box. If the sink base is the only damaged box and the layout works, refacing plus a new plywood sink base can be a sensible middle path. If swelling has spread along the run, replacement is the better buy.
Cabinets on their own don’t need a building permit in Avondale — the city’s code lists cabinets and countertops as exempt finish work. Moving the sink, adding circuits, or relocating a gas range does need a permit from the City of Avondale’s Building Services Division. Our Avondale permit guide explains what needs one.
7. Practical Ways to Save on Cabinets
You can trim a cabinet budget substantially without ending up with a kitchen that looks or feels cheap. The key is spending where it shows and lasts, and saving where it doesn't:
- Choose semi-custom over full custom if your layout is fairly standard — you'll often get the same look for noticeably less.
- Keep plywood on the boxes near water (sink, dishwasher) and consider budget boxes elsewhere if you must economize.
- Pick a simpler door style — Shaker and flat-panel deliver a clean, current look for less than raised-panel or glass fronts.
- Favor stain or a standard paint color over glazing, distressing, or custom colors.
- Reface instead of replace when your boxes are sound and the layout works.
- Keep the existing footprint — moving cabinet runs and plumbing adds cost fast.
- Add organizers selectively where they earn their keep, rather than in every cabinet.
- Buy factory-direct to skip retail markups — more on that below.
Questions to Ask Before You Buy Cabinets
- Is this quote priced per linear foot or per box, and what does each foot include?
- Are the boxes plywood or particleboard — and which are near the sink and dishwasher?
- Are the drawer boxes dovetailed solid wood?
- Are soft-close hinges and drawer glides included or an add-on?
- Is this stock, semi-custom, or custom, and can sizes be modified?
- What's the upcharge for a painted vs. stained finish, or a two-tone island?
- Which interior organizers are included, and which cost extra?
- Is installation included, and who does it — your crew or a subcontractor?
- Does any part of the job (moving the sink, new circuits, a gas line) need a City of Avondale permit, and who pulls it?
- What's the lead time from order to installation?
- What warranty covers the boxes, doors, and hardware?
RTA Cabinets and Lead Times
Ready-to-assemble (RTA) cabinets ship flat and are put together on site, and the quality range is wide. Some RTA lines use plywood boxes and dovetailed drawers that rival semi-custom; others use particleboard and staples and are little better than stock. If you are pricing RTA, ask about the box material, the drawer box material and joints, and whether the drawer slides are full-extension and soft-close. Assembly quality depends on the installer, and replacement parts can take longer to arrive than on a semi-custom line. We recommend RTA only when budget is the overriding priority, and we are glad to look at a specific brand with you before you commit.
Lead time matters as much as price. Stock cabinets are usually available right away, RTA typically ships in 1–3 weeks, semi-custom typically takes 4–8 weeks, and full custom from a local shop runs 8–16 weeks. We build that into the schedule during planning so your cabinets arrive before demo starts, not two weeks after.
How Infinity Keeps Cabinet Costs Down
Because we buy factory-direct and install in-house, we cut out the layers of retail markup that inflate cabinet quotes — which is how our pricing typically runs roughly 15–25% below big-retail quotes. Just as important, we help you spend in the right places: quality plywood boxes and soft-close hardware where they pay off, and honest guidance on where a simpler door style or standard finish will save you money without changing the look you want.
We've been designing and installing kitchen cabinets since 2011, backed by 35+ years of experience and AZ ROC #339999. Our Avondale location at 316 N Central Ave is by appointment, and we come to your home for a free in-home consultation, measure the kitchen, and put the estimate in writing. If you're choosing between tiers, weighing refacing against replacement, or just want a real number for your kitchen, we'd welcome the chance to help. If you'd like to compare makers first, see how to choose the best cabinet maker in Avondale, or request a free written estimate and we'll walk your kitchen with you.
Frequently Asked Questions
How much do kitchen cabinets cost in Avondale, AZ?
Installed kitchen cabinets on our projects generally run about $100–$280 per linear foot for stock, $150–$650 per linear foot for semi-custom, and $500–$1,200+ per linear foot for full custom. A typical mid-size kitchen of roughly 25–30 linear feet often lands somewhere between $8,000 and $22,000 depending on the tier, box construction, door style, and finish you choose. Buying factory-direct and installing in-house, as Infinity does, typically runs 15–25% below big-retail quotes.
Are kitchen cabinets priced per linear foot or per cabinet?
Most remodelers estimate cabinets by the linear foot, which measures the run of cabinets along your walls and island. One linear foot usually bundles the base cabinet, the wall cabinet above it, and the countertop allowance in rough budgeting. Cabinet makers still price individual boxes by size and door style, but linear-foot pricing gives you a fast, apples-to-apples way to compare quotes early in planning.
What is the difference between stock, semi-custom, and custom cabinets?
Stock cabinets come in fixed sizes and a limited set of door styles and finishes, so they are the most affordable but least flexible. Semi-custom cabinets start from standard sizes but let you modify dimensions, door styles, wood species, finishes, and interior organizers, which is the sweet spot for most kitchens. Custom cabinets are built to your exact specifications with no size or design limits, offering the most flexibility and the highest price.
Is cabinet refacing cheaper than replacing?
Yes. Refacing keeps your existing cabinet boxes and replaces only the doors, drawer fronts, and visible surfaces, so it typically costs 30–50% less than a full cabinet replacement. It works best when your boxes are solid, level, and laid out the way you want. If the boxes are damaged, particleboard that has failed, or you want to change the layout, replacement is the better investment.
What drives the cost of kitchen cabinets up the most?
The biggest cost drivers are the tier (stock vs. semi-custom vs. custom), box construction (plywood costs more than particleboard but lasts longer), and the door style, wood species, and finish. Soft-close hinges and drawer glides, dovetailed drawer boxes, glazed or painted finishes, glass doors, and interior organizers each add cost. The size of your kitchen and any special sizes or accents also move the number.
How much do cabinets cost for a typical mid-size kitchen?
A typical mid-size kitchen runs about 25–30 linear feet of cabinets. At stock pricing that is roughly $3,000–$8,000, at semi-custom roughly $6,000–$18,000, and at custom often $15,000 and up. Most homeowners who want quality plywood boxes, soft-close hardware, and a painted or stained finish land in the $8,000–$22,000 range once installation is included.
Do plywood cabinet boxes cost more than particleboard?
Yes. Plywood boxes usually add roughly 10–20% over particleboard, but they hold screws and hinges better, resist moisture, and handle the weight of stone countertops over time. Particleboard and MDF are fine for lower-traffic or budget projects, but in a busy kitchen, or anywhere near a sink or dishwasher, plywood is the more durable long-term choice.
Do I need a permit to replace kitchen cabinets in Avondale?
Not for the cabinets alone. The City of Avondale's building code lists cabinets, countertops, tiling and painting as finish work that needs no building permit. If the project also moves the sink, adds circuits for lighting or appliances, or relocates a gas range, that plumbing, electrical or gas work is not exempt and needs a permit from the city's Building Services Division. We confirm what your scope needs and pull City of Avondale permits for our work. See our Avondale permit guide.
Related Reading
- Custom Kitchen Cabinets
- How to Choose the Best Cabinet Maker in Avondale
- Kitchen Remodel Cost Guide
- Avondale Remodeling Permits
- Shaker vs. Flat-Panel Cabinets
- Read Our Reviews
Get a Free Cabinet Estimate in Avondale
Tell us about your project and we'll give you a clear written estimate — no pressure.
Get a Free Estimate Call (602) 885-6998